Mixer showers

Mixer showers take water from both hot and cold water supplies. They mix the hot and cold to reach a desired temperature. They generally flow faster than electric showers. If you have a low pressure gravity water system, you can make the flow more forceful by adding a Mira pump. Mixer showers ideal for homes with a plentiful supply of hot water.

Clear all Narrow your selection by:
Clear Range

Mira Miniduo & Eco Showerhead BIR

Save water, save energy, save money! Paired with Miniduo, the revolutionary Mira Eco Showerhead reduces water consumption in the shower by up to 75% but does not compromise a great showering experience.

RRP £278.48*

Mira Miniduo & Eco Showerhead BIV

Save water, save energy, save money! Paired with Miniduo, the revolutionary Mira Eco Showerhead reduces water consumption in the shower by up to 75% but does not compromise a great showering experience.

RRP £285.53*

Compare now

Mira Miniduo & Eco Showerhead EV

Save water, save energy, save money! Paired with Miniduo, the revolutionary Mira Eco Showerhead reduces water consumption in the shower by up to 75% but does not compromise a great showering experience.

RRP £272.60*

Compare now
3 products to view
Top

All prices are Manufacturer's Recommended Retail Prices in pounds sterling. The price you pay at your local stockist may be different than the Manufacturer's Recommended Retail Price. These prices supersede previous prices and are subject to change without notice. Prices include VAT at 17.5%. These prices do not include shipping.

Close LightboxClose

Mixer Shower Configurations

BIR Enlarge Photo Download photo BIR – Built-In Rigid
The controls and the showerhead are both built in to the wall. No hose or slide bar, it gives you a stylish minimalist look.

BIV Enlarge Photo Download photo BIV – Built-In Variable
The shower control is built in to the wall, creating a smart, clean finish. The shower comes with a showerhead, hose, right-angled hose connector, clamp bracket and slide bar. Some models are available with a soap dish.
BSM Enlarge Photo Download photo BSM – Bath Shower Mixer
The shower and combined bath control is mounted on the bath. The shower comes with a showerhead, hose, clamp bracket, slide bar and soap dish.
Build-in Valve Only Enlarge Photo Download photo Built-In Valve only
The shower control is built in to the wall, creating a smart, clean finish. No showerhead and fittings are supplied.
ERD Enlarge Photo Download photo ERD - Exposed Rigid with Diverter
The shower control and showerhead are both mounted on the wall on a single riser bar. Features a second showerhead with adjustable height.
ER Enlarge Photo Download photo ER – Exposed Rigid
The shower control and showerhead are both mounted on the wall on a single riser bar.
EV Enlarge Photo Download photo EV – Exposed Variable
The shower control is mounted on the wall, and your shower comes with a showerhead, hose, clamp bracket and slide bar. Some models are available with a soap dish.
Exposed Valve Only Enlarge Photo Download photo Exposed Valve only
The shower control is mounted on the wall. No showerhead and fittings are supplied.

 

Close LightboxClose

Thermostatic control

A thermostatic shower prevents the water reaching uncomfortable or even harmful temperatures – important if there are young children or elderly people in your home. A thermostat inside the shower responds to changes in the incoming water, so if someone runs a tap or flushes a toilet, the shower will adjust to keep the shower temperature constant.

Close LightboxClose

Flexible Showering

Mira Showers understands that showering should be made easier for everybody.


The flexible showering range from Mira features safe, high performance showers with thermostatic control and extended control levers for easy grip and operation.


Other products within the Flexible Showering range include accessories such as the shower seat and the special needs fittings pack which features a longer hose and slide bar designed for those looking for increased mobility within the showering area.

Close LightboxClose

Approvals

Water Efficient Product Enlarge Photo Download photo BEAB Approved Mark
The BEAB Approved Mark is an electrical safety mark. It demonstrates to everyone in the supply chain that the UK's leading, independent approvals specialists have evaluated a product to the highest European and International standards. Backed by the expert knowledge of the approvals engineers, the BEAB Approved Mark can provide a robust defence in law against a product liability claim.

RNIB Enlarge Photo Download photo BEAB Care Mark
The BEAB CARE Mark has been developed in recognition of the additional performance requirements of certain products within the care industry. It is available for products which have already complied with the appropriate electrical safety standard, and in addition have been tested against an exacting special test schedule developed to measure specific performance issues relating to its application in the care sector.
Water Efficient Product Enlarge Photo Download photo WRAS
The Water Regulations Advisory Scheme (WRAS) assesses water fittings products to ensure that they do not waste, misuse, unduly consume or contaminate the water supply, in order to show compliance with Regulation 4 of the requirements of the Water Supply (Water Fittings) Regulations 1999.

www.wars.co.uk
Waterwise
The Marque is awarded annually to products which reduce water wastage or raise the awareness of water efficiency.

Marques have been awarded across a broad spectrum of products including dishwashers, showerheads, water storing gels for the garden, toilets and urinals, drought resistant turf, domestic water recycling products, water butts, a waterless carwash, tap flow restrictors, a shower timer and devices to reduce the amount of water used when flushing your toilet, amongst others.

www.waterwise.org.uk
TMV2
The TMV Scheme is an independent third party approval scheme administered by Buildcert.
The TMV Scheme certifies Type 2 thermostatic mixing valves for the domestic market and is working with the Child Accident Prevention Trust to promote the safe use of hot water in domestic premises, with the immediate focus on social housing. TMV2 approval uses BS EN 1111 and 1287 as a basis for the thermostatic valves performance tests.
Water Efficient Product
The Water Efficient Product Labelling Scheme has been developed by the BMA - the lead trade association for manufacturers of bathroom products in the United Kingdom.

The Scheme raises awareness of bathroom products that when installed and used correctly use less water, therefore saving water and energy, whilst delivering the bathing
experience we have come to expect.

Many of Mira’s products now meet the criteria of the Water Efficiency Scheme, and can be easily identified by the BMA logo.

www.water-efficiencylabel.org.uk

 

Close LightboxClose

Email a Friend

Thank you for completing the Mira Showers email a friend form.

Your request has been successfully submitted and information you selected will be emailed to the supplied address(s).

* indicates required field

Please enter information in all required fields.

To send to multiple addresses, separate addresses with a comma.

Send
Error sending message. Please try again later.
Your message has been sent!
Close LightboxClose

Guarantee of Quality

Mira Showers guarantee products against defects in materials or workmanship from the date of purchase.

Within the guarantee period we will resolve defects, free of charge, by repairing or replacing parts or modules. To be free of charge, service work must only be undertaken by Mira Showers or our approved agents in Northern Ireland and Republic of Ireland.

Service under this guarantee does not affect the expiry date of the guarantee. The guarantee on any exchanged parts or product ends when the normal product guarantee period expires.

Not covered by this guarantee:

Damage or defects arising from incorrect installation, improper use, lack of maintenance or system debris, including build-up of limescale.

Damage or defects if the product is taken apart, repaired or modified by any person not authorised by Mira Showers or our approved agents.

Mira Showers will not accept any liability for loss of use of the product or any losses that are indirectly associated with the incident that caused you to claim, unless caused by our negligence or that of our agents. For example, loss of earnings due to time taken off work to deal with the incident will not be covered.

This guarantee is in addition to your statutory and other legal rights.

For full details and what to do if something goes wrong, click here.

Close LightboxClose

Water Systems

All water systems
Showers flagged with the "ALL" symbol are compatible with both mains and low pressure water systems. By fitting a Mira pump when the shower is used on a low pressure system you can significantly increase the flow rate and enjoy a more invigorating showering experience.

  • Click here for more information on water systems
Mains pressure water systems

Mains Pressure Combination Boiler
A combination boiler heats cold water direct from the cold mains supply as soon as you turn on the shower or a hot tap in your home. The boiler is normally wall mounted and you won't have a cold water tank (cistern) in your loft or a hot water tank (cylinder) in your airing cupboard. Because the water supply to the system is mains fed this produces a forceful showering experience.

For a powerful showering experience we would recommend fitting a digital or mixer shower to this type of system. Alternatively, for a more gentle flow rate you could use one of Mira's electric shower fitted to the cold mains, this is also an ideal low cost option for a second or en-suite shower room.

Or

Mains Pressure Unvented
An unvented mains pressure system stores mains pressure water in a large strengthened hot water tank (cylinder), usually found in the airing cupboard. The hot water will be heated either by immersion heaters fitted in the side of the cylinder or by a central heating boiler. This type of system doesn't require a cold water tank (cistern) in your loft and provides a high water flow rate & pressure. Other systems also producing hot water at mains pressure are available these are generally known as thermal store systems.

To make the best use of the flow & pressure of these systems we would recommend a digital or mixer shower. Alternatively, for a more gentle flow rate you could use one of Mira's eco mixer showers or fit an electric shower to the cold mains, this is an ideal low cost option for a second or en-suite shower room.

  • Click here for more information on water systems
Low pressure gravity systems

Low pressure gravity system
This is the most common of all domestic water systems. The system consists of a cold water tank (or cistern) normally in your loft & a hot water tank (or cylinder) normally in your airing cupboard. It's called a low pressure gravity system because the water is kept under pressure via the gravity-fed water delivered from the cistern. How much pressure is produced is determined by the height at which the base of the cold water cistern is situated above the outlet. This is typically a minimum height of 1metre for showers. The greater the height of the cistern above the showerhead the more pressure is created.

If you have this system you can install a mixer, pumped digital or all-in-one power shower and you will have get a great showering experience. If you decide on a mixer and want a more forceful shower, fitting a pump will boost the flow rate & pressure even more.

  • Click here for more information on water systems
Cold mains supply systems

Cold Mains Supply
If you do not have or want to use your stored hot water then an ideal solution is to fit an electric shower to the cold mains supply. The benefit of an electric shower is that it is always ready to use as the water is heated instantaneously within the shower. The amount of hot water flow produced by an electric shower depends on the power rating measured in kilowatts (kW). The higher the kW rating the better the flow.

Most mains water supplies will provide enough pressure to operate an electric shower. In the rare instances that it cannot then Mira has an alternative pumped electric shower. This must be fitted to a cold water tank (cistern) supply and the internal pump will then generate the pressure normally provided by the cold mains.

  • Click here for more information on water systems
Close LightboxClose

Product Approvals

BEAB Approved Mark

BEAB Approved Mark
The BEAB Approved Mark is an electrical safety mark. It demonstrates to everyone in the supply chain that the UK's leading, independent approvals specialists have evaluated a product to the highest European and International standards. Backed by the expert knowledge of the approvals engineers, the BEAB Approved Mark can provide a robust defence in law against a product liability claim.

BEAB CARE Mark

BEAB CARE Mark
The BEAB CARE Mark has been developed in recognition of the additional performance requirements of certain products within the care industry. It is available for products which have already complied with the appropriate electrical safety standard, and in addition have been tested against an exacting special test schedule developed to measure specific performance issues relating to its application in the care sector.

Water Regulations Advisory Scheme

WRAS
The Water Regulations Advisory Scheme (WRAS) assesses water fittings products to ensure that they do not waste, misuse, unduly consume or contaminate the water supply, in order to show compliance with Regulation 4 of the requirements of the Water Supply (Water Fittings) Regulations 1999.

Waterwise

Waterwise
The Marque is awarded annually to products which reduce water wastage or raise the awareness of water efficiency. Marques have been awarded across a broad spectrum of products including dishwashers, showerheads, water storing gels for the garden, toilets and urinals, drought resistant turf, domestic water recycling products, water butts, a waterless carwash, tap flow restrictors, a shower timer and devices to reduce the amount of water used when flushing your toilet, amongst others.

TMV2

TMV2
The TMV Scheme is an independent third party approval scheme administered by Buildcert. The TMV Scheme certifies Type 2 thermostatic mixing valves for the domestic market and is working with the Child Accident Prevention Trust to promote the safe use of hot water in domestic premises, with the immediate focus on social housing. TMV2 approval uses BS EN 1111 and 1287 as a basis for the thermostatic valves performance tests.

TMV3

TMV3
TMV3 valves are engineered to a high standard so that they meet Government Health and Safety requirements for use in public places such as Schools, Hospitals, Offices etc. Predominantly used in the healthcare industry, however, every employer has a duty under the Health and Safety at Work Act 1974 to ensure that the health and safety of patients, residents, visitors and staff using a building are not at risk, and this applies to all types of buildings, not just healthcare premises.

Water Efficient Product

Water Efficient Product
The Water Efficient Product Labelling Scheme has been developed by the BMA - the lead trade association for manufacturers of bathroom products in the United Kingdom. The Scheme raises awareness of bathroom products that when installed and used correctly use less water, therefore saving water and energy, whilst delivering the bathing experience we have come to expect.

Many of Mira's products now meet the criteria of the Water Efficiency Scheme, and can be easily identified by the BMA logo.

Close LightboxClose

Product Comparison

Please select two or more products to compare.

Simply click the "Add to compare" tick-box below the products you wish to compare.

When you have made your selection, click on the "Compare now" button to view the results side by side.

Close LightboxClose

Product Comparison

Apologies, but in order for you to be able to view our products clearly side by side, you can only select a maximum of 4 products to compare.

Please review your selection to continue. By clicking on the "Compare now" button you will be able to view and amend your selection.

When you have completed selecting the products you wish to compare, click the "Compare now" button.

Compare now