Step By Step Mira Leap 1200 Sliding Enclosure Installation

Friday 31st March 2017

More Articles

The Mira Leap shower enclosure range features our unique installation system which removes the need for drilling or screwing through the door profile and wall channel. This ensures a completely clean and uncluttered look for your customer and aids your installation experience of the enclosure. We've put together a step-by-step installation guide below for installing to Mira Leap 1200mm sliding door enclosure.

Step 1 - Ensure that the shower tray is level in all directions and that it is properly sealed to the wall. Step 1 - Ensure that the shower tray is level in all directions and that it is properly sealed to the wall.
Step 2 - Position the wall jambs on the wall and mark the fixing points, using a spirit level to make sure the wall channels are perfectly upright. Step 2 - Position the wall jambs on the wall and mark the fixing points, using a spirit level to make sure the wall channels are perfectly upright.
Step 3 - Apply silicone sealant to the wall and at the bottom where the wall channels will be placed and tighten the fixing screws on both wall channels. Step 3 - Apply silicone sealant to the wall and at the bottom where the wall channels will be placed and tighten the fixing screws on both wall channels.
Step 4 - Insert the side panel and pre-assembled door frame into the wall channels and connect the door frame into the side panel corner post. Step 4 - Insert the side panel and pre-assembled door frame into the wall channels and connect the door frame into the side panel corner post.
Step 5 - Make sure the door frame and side panels are aligned with the sides of the tray and use a 3mm allen key to lock all elements together via the Twist & Lock screwless installation system. Step 5 - Make sure the door frame and side panels are aligned with the sides of the tray and use a 3mm allen key to lock all elements together via the Twist & Lock screwless installation system.
Step 6 - Install the aluminium infill strips working from top to bottom, ensuring that they sit flush within the aluminium profile. Step 6 - Install the aluminium infill strips working from top to bottom, ensuring that they sit flush within the aluminium profile.
Mira Leap Slider Step-by-Step #7.jpg

Step 7 - Refit the sliding doors into the top track and depress the quick release mechanisms on both lower roller assemblies to install the doors securely into the bottom track.

Mira Leap Slider Step-by-Step #8.jpg

Step 8 - Install the door seals onto the fixed and sliding door panels and then connect the double handle assemblies to both sliding doors.

Hope you found the above useful, alternatively we have step by step installation film of both the sliding and quadrant enclosure available for you to watch here.